Sony DX120 Manuale Utente

7

Connecting the Projector

P

re

par

a

tio

n

B Preparation

• Make sure all the equipment is powered off when connecting the projector.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or 

cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.

• For more information, refer also to the instruction manuals of the equipment you are connecting.
• Use a no-resistance audio cable.

Connection with a computer is explained for each input signal.

• Use HDMI-compatible equipment and cable(s) that have an HDMI logo on them.
• The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal 

or CEC (Consumer Electronics Control) Signal.

• It is recommended that you set the resolution of your computer to 1024 × 768 pixels (VPL-DX140/

DX120/DX100) or 1280 × 800 pixels (VPL-DW120) for the external monitor.

For connecting a computer with an RGB output connector.

RGB output 
connector

Audio output 
connector

Mini D-sub 15-pin cable (supplied)

Computer

Audio cable (Stereo mini plug) 
(not supplied)

For connecting a computer with an HDMI output connector.

HDMI output 
connector

HDMI cable 
(not supplied)

Computer