Omnitron iConverter 4xT1/E1 MUX 8821-1-B Manuale Utente
Codici prodotto
8821-1-B
iConverter
iConverter
®
Multiplexes four independent T1 or E1 channels from
■
copper links into one fiber link
Optional 10/100 copper Ethernet service multiplexed
■
with T1/E1 circuits
Small Form Pluggable (SFP) transceivers or fixed-fiber
■
connectors
Supports multimode, single-mode dual fiber, single-
■
mode single-fiber, in standard and CWDM wavelengths
Locally configurable via DIP-switches
■
Configurable alarm relay contacts for audio/visual fault
■
notification
Supports local and remote fiber and copper loop-back
■
modes
Commercial (0 to 50º C) and wide (-40 to 60º C)
■
operating temperature ranges
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
4xT1/E1 MUX
Unmanaged T1/E1 Multiplexer
The iConverter 4xT1/E1 MUX multiplexs up to four T1/E1s and
an optional 10/100 Ethernet onto a fiber optic transport link.
The unmanaged T1/E1 Multiplexer provides an easy to use
and cost effective multi-service solution.
The iConverter 4xT1/E1 MUXes operate in a back-to-back
configuration, with one multiplexer at each end of the fiber link.
This easy-to-use and cost-effective MUX transports services
from legacy TDM equipment across long distances that exceed
the reach or capacity of copper. This includes applications such
as T1/E1 extension, mobile backhaul and building-to-building
PBX connectivity, making it ideal for Enterprise, Telecom and
Utility industries.
The 4xT1/E1 MUX supports fixed-fiber and Small Form
Pluggable (SFP) transceivers, enabling easy adaptability to
different fiber types, distances and wavelengths. The 4xT1/E1
MUX supports multimode, single-mode, single-mode single-
fiber, in standard and CWDM wavelengths.
The 4xT1/E1 MUX supports standard T1, E1 and Primary
Rate Interface (PRI), voice or data. The MUX also supports
AMI, B8ZS and HDB3 line codes. DIP-switches provide easy
configuration of the T1/E1 line codes and line build-out.
The copper interfaces feature four RJ-48 connectors for
balanced T1/E1 applications. An optional adapter cable is
available to convert each RJ-48 interface to a BNC interface
for unbalanced E1 transport applications.
The 4xT1/E1 MUX features user-selectable local loop-back on
both the copper and fiber ports, remote fiber loop-back and
circuit test modes. This functionality facilitates diagnosis of the
remote unit, and minimizes the need for test equipment and
support personnel at each end of a link. Alarm relay and LEDs
provide fault notification for loss of power, LOS and AIS.
The 4xT1/E1 MUX is a compact, unmanaged standalone unit
available in both AC and DC models. The AC model accepts
AC power input ranging from 100VAC to 240VAC, 50/60Hz,
while the DC model accepts 18VDC to 60VDC.
SFPs not included
Key Features