Denon AVR-587 Manuale Utente
Basic Operation
Basic Operation
ENGLISH
28
ENGLISH
Selecting the Dolby Digital and DTS Surround
mode (only with digital input)
mode (only with digital input)
Play a program source with the
,
mark.
• “
” or “
” lights, depending on the source.
Press
SURROUND PARAMETER
.
Press
D
D H
H
to select the item, then press
F
F G
G
to set.
The parameter switches as shown below each time the button is
pressed.
pressed.
Press
[STANDARD]
to select “STANDARD (Dolby/DTS
Surround)”.
3
6
5
4
Select an input source for which digital (COAXIAL or
OPTICAL) is set (
OPTICAL) is set (
page 21).
1
Press
INPUT MODE
to select “AUTO”.
2
D.COMP.:
The dynamic range is compressed. Select one of four modes:
“OFF”, “LOW”, “MID” (middle) or “HIGH”.
“OFF”, “LOW”, “MID” (middle) or “HIGH”.
Effective source mode
Dolby Digital /
DTS (For DTS sources, only displayed for compatible software.)
Dolby Digital /
DTS (For DTS sources, only displayed for compatible software.)
LFE:
To play the various types of software properly, we recommend
setting to the values shown below.
• To play Dolby Digital software: “0 dB”
• To play DTS movie software: “0 dB”
• To play DTS music software: “–10 dB”
setting to the values shown below.
• To play Dolby Digital software: “0 dB”
• To play DTS movie software: “0 dB”
• To play DTS music software: “–10 dB”
TONE:
Adjust the tone control.
Can be set in surround modes other than direct mode.
Can be set separately for the different surround modes.
(Adjusted together for the Dolby/DTS SURROUND modes.)
Can be set separately for the different surround modes.
(Adjusted together for the Dolby/DTS SURROUND modes.)
SB CH OUT:
Select the play mode or surround back channel playback method.
• The surround back indicator lights.
(1) For multi-channel sources
• SB OFF (OFF):
Not played.
• NON MTRX:
Surround channel signal played.
• MTRX ON:
Surround channel signal played with digital matrix processing.
• ES MTRX:
DTS signal played with digital matrix processing.
• ES DSCRT:
Signal included in DTS-ES discrete 6.1-channel sources played.
• PL
II
x CINEMA:
Decoded in Dolby Pro Logic
II
x Cinema mode, surround back
signal played.
Set the surround back speaker to “2sp” at Speaker
Configuration mode (
Configuration mode (
page 19).
• PL
II
x MUSIC:
Decoded in Dolby Pro Logic
II
x Music mode, surround back
signal played.
Set the surround back speaker to “1sp” or “2sp” at Speaker
Configuration mode (
Configuration mode (
page 19).
CINEMA EQ.:
Use this if movie dialogues sound harsh to lower the treble sound.
Effective source mode
Dolby Pro Logic
Dolby Pro Logic
II
x / Dolby Pro Logic / Dolby Digital /
DTS Surround / DTS NEO:6 / NEURAL SURROUND
• Select “DEFAULT Y/N” and press
F
F to reset all the settings.
¢ Dialog normalization function
This operates automatically when playing Dolby Digital sources.
This is a function for automatically correcting the standard signal level
for different program sources. The correction value can be checked by
pressing STATUS.
This is a function for automatically correcting the standard signal level
for different program sources. The correction value can be checked by
pressing STATUS.
O
f
f
s
e
t
-
4
d
B
The numbers are the correction value when corrected to the standard level.
(2) For 2-channel sources
• OFF: Not played.
• ON: Surround channel signal played.
• ON: Surround channel signal played.
Press
ENTER
or
SURROUND PARAMETER
.
7
CINEMA EQ
D.COMP.
SURROUND BACK
LFE
TONE DEFEAT
DEFAULT
If you do want the bass and treble to be adjusted, turn off the
tone defeat mode.
tone defeat mode.