Denon s-302 ost-f1260 Manuale Di Servizio

 

 

       

 

 

 

 

No. : 

 OST-F1260 

January 23, 2008 

 

 

S-302  

 

 

 

 

 

Correction of Firmware for IR codes. 

 

 

 The Unit can not accept individual IR codes for CI. 

 
Solution:  

The firmware has been corrected so that the malfunction does not 

occur.

 
MODIFICATION:  Please record each new firmware separately onto a blank CD-
R together with the following dummy file and update your customer's unit of the 
subject models. 
 

 

 
The dummy file to be recorded together with the program file:  
 
File Name: adummy.zip 
 
Cautions:  
• When recording the file on a blank CD-R, the format shall be "ISO9660" and the 
session shall be "CLOSE".  
• When recording the file on the CD-R, please record it at the 4-times speed of 
the normal speed.  
• When the 4-times speed is not available, please record it at the minimum speed 
that is available in your machine.  

The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their 
employees.  This document may contain information that is privileged, confidential and may be protected from disclosure under 
applicable laws and terms of the DENON Service Agreement.  Any distribution, disclosure, dissemination or copying of this 
document and the information it contains is prohibited.  No responsibility will be accepted by DENON for any damage, injury or loss 
resulting from the misuse of the information contained in this document. 

• If the file was recorded at a high speed, such as 32 or 48 times speed of the 
normal speed, the upgrading may fail due to the data incorrectly recorded on the 
CD-R.