Denon dn-sc2000 ver-1 Manuale Di Servizio
10
SPECIAL MODE
1. Special mode setting
Connect to PC while pressing buttons A, B and C.
Mode
A
B
C
Contents
Version Up Mode
1
2
3
Firmware Upgrade
Version Display
1
3
4
Firmware version display
Test Mode
1
2
4
LED(Button) Check
2. Version Up Mode
(1) Pressing (SHIFT+NEXT+PREVIOUS) at the same time, then connect SC2000 to PC for F/W version processing.
(2) DN-SC2000 will enter updating mold. CUE-1 will light to indicate “Update Ready.”
(3) PC Operation System will pop-up a new hard disc, named DN-SC2000.
(4)
(2) DN-SC2000 will enter updating mold. CUE-1 will light to indicate “Update Ready.”
(3) PC Operation System will pop-up a new hard disc, named DN-SC2000.
(4)
Copy updated fi le (EX: DN-SC2000_v1.13.bin), and paste on “DN-SC2000” hard disc.
(5) It will start updating. After updating successfully, DN-SC2000 will switch to Midi Controller automatically.
(6)
(6)
Firmware updating State
CUE-1: Update Ready, CUE-2: Update Data(0%), CUE-3: Update Data(50%), CUE-4: Update Data(100%)
FX UNIT: Update Success (* If it doesn’t light, it means “Updating Error”)
FX UNIT: Update Success (* If it doesn’t light, it means “Updating Error”)
(7) Upon completion of the upgrade, it automatically restarts, start in Normal mode.
Upgrade will end in about 10 seconds.
Note:
Please do not switch off the PC during update of Firmware. In addition, please do not take off a USB cable.
Please do not switch off the PC during update of Firmware. In addition, please do not take off a USB cable.
1
2
3
4