Denon s-302 ost-f1469 Manuale Di Servizio
Cautions:
• When recording the file on a blank CD-R, the format shall be "ISO9660" and the
session shall be "CLOSE".
• When recording the file on the CD-R, please record it at the 4-times speed of
the normal speed.
• When the 4-times speed is not available, please record it at the minimum speed
that is available in your machine.
• If the file was recorded at a high speed, such as 32 or 48 times speed of the
normal speed, the upgrading may fail due to the data incorrectly recorded on the
CD-R.
Procedure to update the Firmware:
(1) Turn on the Power of the unit, and open the Disc Tray.
(2) Put the Disc of "SUB" for updating the firmware on the Tray and close the
Tray.
(3) The update starts automatically. After completion of the update, the Tray
opens automatically. Take out the Disc from the Tray.
(4) Under the above condition, the unit will not accept any buttons operation.
Therefore, unplug the AC Power Cord from the AC outlet once. Then, initialize
the unit.
session shall be "CLOSE".
• When recording the file on the CD-R, please record it at the 4-times speed of
the normal speed.
• When the 4-times speed is not available, please record it at the minimum speed
that is available in your machine.
• If the file was recorded at a high speed, such as 32 or 48 times speed of the
normal speed, the upgrading may fail due to the data incorrectly recorded on the
CD-R.
Procedure to update the Firmware:
(1) Turn on the Power of the unit, and open the Disc Tray.
(2) Put the Disc of "SUB" for updating the firmware on the Tray and close the
Tray.
(3) The update starts automatically. After completion of the update, the Tray
opens automatically. Take out the Disc from the Tray.
(4) Under the above condition, the unit will not accept any buttons operation.
Therefore, unplug the AC Power Cord from the AC outlet once. Then, initialize
the unit.
Caution!
: During the rewriting operation, do not turn off the Power Supply of the
unit or do not switch the function of the unit, by any means.
Initialization Procedures:
(1) Press the "ON/STANDBY" switch to set the standby mode, and then unplug
the set’s power supply cord from the wall power outlet.
(2) Hold the following "SKIP –" button and "FUNCTION" button after 30 second,
and plug the power supply cord into the outlet.
(3) Check that the "INITIALIZE" is flashing with an interval of about 1 second,
and release your fingers from the 2 buttons. The micro processor will be
initialized.
Confirmation of the Version of Firmware:
(1) During the STANDBY mode, while holding the "FUNCTION" and "SKIP +"
buttons on the unit down simultaneously, press "ON/STANDBY" button.
(2) Press "STATUS" button on the back of the Remote Control, so that each
version appears on the display.
(3) Confirm that the "SYSTEM" Version is displayed as follows.
Initialization Procedures:
(1) Press the "ON/STANDBY" switch to set the standby mode, and then unplug
the set’s power supply cord from the wall power outlet.
(2) Hold the following "SKIP –" button and "FUNCTION" button after 30 second,
and plug the power supply cord into the outlet.
(3) Check that the "INITIALIZE" is flashing with an interval of about 1 second,
and release your fingers from the 2 buttons. The micro processor will be
initialized.
Confirmation of the Version of Firmware:
(1) During the STANDBY mode, while holding the "FUNCTION" and "SKIP +"
buttons on the unit down simultaneously, press "ON/STANDBY" button.
(2) Press "STATUS" button on the back of the Remote Control, so that each
version appears on the display.
(3) Confirm that the "SYSTEM" Version is displayed as follows.
(4) Turn off the AC power of the unit.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.