Denon dvd-a1udci dz09-280 Manuale Di Servizio

 
 
 
Confirmation of the version:  
(1)  Press the "OPEN/CLOSE" button and open the Disc Tray.  
(2)  Remove the Disc from the Tray.  
(3)  Please confirm! "NO DISC" on the FL Display.  
(4)  While pushing the "PLAY" and "OPEN/CLOSE" button, turn on the power of 
unit.   
(5)  Plug in AC CORD.  
(6)  The indication of "PLAY" and "PAUSE" will be displayed on FL Display.  
(7)  Please confirm! "NO DISC" on the FL Display, and wait 10 seconds.  
(8)  Press the buttons on the remote control in the order of "3", "2", "6" and "5". 
(9)  The version of the firmware will be indicated on the FL Display.  
(10)  The firmware list will also be shown on connected TV (GUI).  
(11)  Push the "UP" button of cursor button, version of the each firmware will be 
indicated on the FL Display. 
 
 
 
 
 
 
 
 
8. The version of new firmware 

 

 
 
 

Please apply the above modification to the models in the following serial numbers.

 

(Full-

digits) 

 
***1500001 ~ 0021510159 

The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their 
employees.  This document may contain information that is privileged, confidential and may be protected from disclosure under 
applicable laws and terms of the DENON Service Agreement.  Any distribution, disclosure, dissemination or copying of this 
document and the information it contains is prohibited.  No responsibility will be accepted by DENON for any damage, injury or loss 
resulting from the misuse of the information contained in this document.