Panasonic AJ-D215P Manuale Utente

Pagina di 68
– 66 –
DC IN (XLR, 4P)
LENS (12P)
DVCPRO interface connector (option):
Complies with IEEE 1394-1995 standard
OTHER
[CONNECTORS]
FRONT MIC:
Phantom +48V (built-in microphone), –60 dBu, balanced, 3 k
Ω
(–60, –50 or –40 dBu setting possible on menu)
AUDIO IN CH1/CH2 (XLR, 3P):
–60, –50 or –40 dBu setting possible on menu, balanced, 10 k
Ω
Internal DIP switch setting:
Phantom 48V output possible
line (–6/0/+4 dBu) switchable
INPUT
[ACCESSORIES]
1.5˝ viewfinder   
Microphone (attached to main unit)
Battery holder (attached to main unit)
Battery mounting connector and screw supporting Sony-made battery (NP-1B)
AUDIO OUT CH1/CH2 (Phono pin jack):
–6 dBu, unbalanced, low impedance output
HEADPHONE OUT:
Stereo mini jack
VIDEO OUT (BNC):
1.0 V
P-P
, 75 
Ω
S-VIDEO OUT:
Y signal = 1.0 V
P-P
, 75 
Ω
C signal = 0.286 V
P-P
(burst), 75 
Ω
OUTPUT
[VTR]
The video and audio performance specifications apply for a tape which has been recorded on
this unit and played back on a standard player (ANALOG COMPONENT OUT).
Tape speed:
33.8201 mm/sec
Recording/playback time:
Approx. 184 min. ( using AJ-5P92LP)
FF/REW time:
Less than 8 min. (using AJ-5P92LP)
Video signal band:
Brightness = 0 Hz to 5.75 MHz, +1.0 dB/–3.0 dB
S/N ratio:
55 dB
Linearity:
Less than 2%
Y/C delay:
Within 30 ns
Audio sampling frequency:
48 kHz (synchronized with video)
Quantizing:
16 bits/sample
Frequency response: 20 Hz to 20 kHz, +1.0 dB/–1.5 dB (at reference level)
Distortion:
Less than 0.2% (at 1 kHz, operating level)
Crosstalk:
Less than –65 dB (between channels, at 1 kHz)
Wow and flutter:
Below measurable limits
Headroom:
20 dB
For AJ-5P92LP cassette tapes, use a VTR supporting DVCPRO (25
Mbps) 184 minute tapes.