Panasonic AJ-HD1400P Manuale Utente

42

*1 Displayed menus may vary depending on the settings in

menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).

*2 In the initial settings, the Recording Mark is not

overlapped on the HD SDI signals.

“_____” indicates the factory setting.

For setting whether the recording/stop is executed 
automatically in conjunction with the Recording Mark 
of the HD SDI input signals from our camera recorder 
or not.
0000

Do not to execute the recording/stop automatically.

To execute the recording/stop automatically in 
conjunction with the Recording Mark in the LTC 
information added to the HD SDI.

To execute the recording/stop automatically in 
conjunction with the Recording Mark in the SVITC 
information added to the HD SDI.

<Notes>
z Set the LOCAL/REMOTE switch to the REMOTE 

position.

z For the selection of TYPE 1 or TYPE 2, refer to 

“Our camera recorder, Recording format, and Recording Mark.”

z To select TYPE 1 or TYPE 2 to start recording 

automatically, set this unit to the REC PAUSE 
mode. It may not operate in any mode other than 
the REC PAUSE mode. After accepting the auto 
stop, this unit changes to the REC PAUSE mode.

z When this unit is recording in normal operation, the 

AUTO REC function is not available.

Our camera recorder, Recording format, and Recording Mark

¢¢p over 60p

ー

–*

–*

–*

–*

–*

–*

–*

For setting the repeat playback mode.
0000

No repeat playback (normal operation).

The tape stops near the BEGIN point when it is fast 
forwarded or rewound.

When the tape reaches the END point, it is 
rewound to the BEGIN point, and stops.

When the tape reaches the END point, it is 
rewound to the BEGIN point, and plays back, and 
this is done repeatedly.

For setting the BEGIN point in the repeat playback 
mode.
Either TC or CTL is set as the counter display mode 
using the COUNTER button.
If no mode is set, – – : – – : – – : – – appears, and the 
tape start serves as the BEGIN point.

For setting the END point in the repeat playback mode.
Either TC or CTL is set as the counter display mode 
using the COUNTER button.
If no mode is set, – – : – – : – – : – – appears, and the 
tape end serves as the END point.

For setting what images are to be output while the 
tape returns to the BEGIN point in the repeat 
playback mode.
0000

The tape returns to the BEGIN point with the image 
played back at the END point still frozen.

The tape returns to the BEGIN point while the 
screen remains black.

The tape returns to the BEGIN point following the 
the settings in menu No. 140 OUTPUT.

<Note>
If the tape end is set as the END point when 
“FREEZE” is selected, the playback image will not be 
frozen properly.
Set the END point to a place within the range where 
images are recorded.

For setting the type of battery.
0000

Settings for 1 pc. 12 V battery (NEAR: 11.2 V, 
END: 10.6 V)

Settings for 1 pc. 13 V battery (NEAR: 12.0 V, 
END: 10.6 V)

Settings for 1 pc. 14 V battery (NEAR: 13.6 V, 
END: 10.6 V)

Settings for 1 pc. lithium-ion battery “BP-L90A”. 
(NEAR: 11.7 V, END: 10.6 V)

Settings for 1 pc. lithium-ion battery “ENDURA80”.  
(NEAR: 12.9 V, END: 12.4 V)

Setting for using the battery selected by the menu 
item No.181 TYPE-A NEAR item and No.182 
TYPE-A END item

Setting for using the battery selected by the menu 
item No.183 TYPE-B NEAR item and No.184 
TYPE-B END item