Panasonic BT-LH2600W Manuale Utente

12

Six types of information are displayed on the screen. The input signal status, picture adjusting knob status, 
sharpness display, function display, audio level meter display and the menu display. 

1. The selected input line (J page 9,  )

• VIDEO, Y/C, SDI1, SDI2,  

YP

B

P

R

/RGB-VIDEO/RGB-COMP.

• Displayed when “FILM” is selected in “GAMMA 

SELECT”.

• The display status can be set in “STATUS 

DISPLAY” in the “SYSTEM CONFIG” menu 
(J page 21). 

• If “UNSUPPORT SIGNAL” is displayed, then either 

the current input signal is not supported or the 
“INPUT SELECT” menu setting needs to be 
changed. 

• When “NO SIGNAL” is displayed, there is no input 

signal. 

• Displayed when control lock is ON.

Note: 
“UNSUPPORT SIGNAL” and “NO SIGNAL” may not be 
displayed correctly.

Picture adjusting knob (J page 9,  )
• This knob can be rotated and pushed. 
• The status display appears when the knob is 

pushed.  
The display disappears when the knob is pushed 
again, or if the knob is not operated for 10 seconds.  

• Settings can only be adjusted in the status display. 
• The display position can be changed (J page 21

Status display:
PHASE, CHROMA, BRIGHT, CONTRAST or BACKLIGHT

Note: 
The volume knob status display is not displayed on the 
screen. 

• Sharpness is displayed when it is set. 
• The display disappears if remains idle for 2 minutes. 

SDI

1

4

1

2

3

SHARPNESS

30