Panasonic sa-ht1000 Manuale Utente

RQT7061

≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the 

unit can record onto.

≥The disc is unformatted. Format the disc so this unit can record on it. [RAM]
≥The write-protect tab on the cartridge is set to PROTECT.
≥Some programs have limitations on the number of times they can be recorded (CPRM).
≥The disc is protected with DISC SETTING.
≥The disc is full or nearly full. Erase unneeded programs or use another disc.
≥You cannot record on finalized DVD-R discs.
≥Audio from FM/AM broadcasts and the L1 OPTICAL IN terminal cannot be recorded.

r programming does 

≥The guide channels are incorrect. Go to the Channel menu and correct them with “VCR Plusi 

CH Setting”.

≥The clock is wrong. Go to the Set Up menu and correct it with Clock settings.

≥The timer program is incorrect. Correct the program. 
≥The unit is not on timer recording standby. (“

F” on the unit’s display is not on.) Press [Í 

POWER] to turn the unit off and make sure that “

F” is on.

≥Different timer program times overlap.
≥The clock is wrong. Go to the Set Up menu and correct it with Clock settings. 

≥The disc has run out of space. Use a disc that has enough space to record the program.

≥The timer program remains if set to daily or weekly.

∫] is pressed.

≥Press [∫] and then [ENTER] within 5 seconds to turn “

F” off. Recording stops.

≥As this unit is unable to erase data written to DVD-RAM with a computer, the available 

recording time does not increase. The data will be erased if you reformat the disc.

≥If the disc is dirty, wipe with the DVD-RAM/PD disc cleaner (optional) before formatting. 
≥Available recording space on the DVD-R does not increase even after erasing previously 

recorded programming.

≥If there is a power failure or the plug is disconnected from the household AC outlet while 

recording or editing, the program may be lost or the disc may become unusable.
➡We cannot offer any guarantee regarding lost programs or discs. You will have to format the 

disc or use a new disc.

1] 

≥Insert the disc correctly with the label facing up.
≥This unit cannot play discs other than the ones listed in these operating instructions.
≥The disc is dirty. Clean it.
≥The disc may be badly scratched.
≥You inserted a blank DVD-RAM or DVD-R.
≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.

≥Some titles and chapters on DVD-Video are not played when you have changed the ratings 

level.

≥Some distortion is normal.

≥The languages are not recorded on the disc.
≥You may have to use the disc’s menus to select languages.

≥Subtitles are not recorded on the disc.
≥Turn the subtitles on.
≥Subtitles around markers may fail to appear.

≥This function depends on software availability. Angles can only be changed during scenes 

where different angles are recorded.

≥Return the ratings setting to “8”.

While the disc tray is open, press and hold [

4] and [5] on the main unit at the 

same time for 5 or more seconds.

≥Go to the Display menu and change the display’s brightness with “FL Display”. 

≥The clock is not set.

≥Displayed recording time is based on the number of frames per second. This number is 

subject to minute variations. When recording over long periods, these variations may result in 
the difference between displayed recording time and actual recording time. This is normal.

[MP3]

≥Times may not appear correctly when searching through tracks recorded with a variable bit 

rate.

7061en.book  49 ページ  ２００３年７月１日　火曜日　午前１１時４４分