Panasonic KX-PS8100 Manuale Utente

Scanner does not turn 
on.

Power cord is not 
connected.

Connect the power 
cord.

Scanner Error 49 is 
displayed on the 
scanner LCD panel 
when powered on.

Scanner is locked.

Unlock the scanner.

Scanning operation 
cannot be performed.

SCSI cable is not 
properly connected.

Connect the SCSI 
cable.

SCSI ID No. or 
terminator switch is 
not set correctly.

Set the SCSI ID No. 
or terminator switch 
correctly.

SCSI-2 board is not 
compatible.

Use a recommended 
SCSI-2 board.

Software may not be 
installed.

Install the software.

Scanned image is dirty.

Original document is 
dirty.

Clean the document.

Scanner glass is dirty.

Clean the scanner 
glass.

One or both ends of 
image is/are not 
scanned.

Document is not 
positioned correctly.

Reposition the 
document correctly 
according to the size.

Scanned image is 
blurred or partially 
colored.

Document is not 
evenly set on the 
scanner glass.

Set the document 
evenly.

Scan quality is bad.

You may not be using 
the software utility 
correctly.

Consult the 

Utilities 

and Drivers 
Reference Guide.

Condensation has 
occurred.

Leave the unit for 4 or 
5 hours.

ABCD - - - - -
- - - - - - - - - -
- - - - - - - - - -
- - - - - -