Panasonic KX-PS8100 Manuale Utente

If a SCSI-2 board has been installed in your computer, be sure it is 
compatible (

). If it is not installed, be sure 

If you do not have a SCSI cable, you will need to purchase one from your 
local computer store or dealer (see 

•

We recommend you to connect your DCIS with only one SCSI device.

•

For a SCSI chain with up to three SCSI-2 (FAST SCSI) devices 
connected, the total length of the SCSI cables must be less than 3 m 
(9.8 ft.).

•

Use shielded cables for SCSI-2 (FAST SCSI).

•

Although a SCSI chain may exceed the recommended length and still 
operate we cannot guarantee this operation.

Make sure the computer, scanner, printer and the other 
connected peripheral devices are turned off.

Connect the SCSI cable (not provided) to the 
computer’s SCSI connector and to the scanner’s SCSI 
connector A or B.

The SCSI-2 board must be installed in the computer.

If you do not have a SCSI-2 board or a SCSI cable, you will need to 
purchase one from your local computer store or dealer (

SCSI connector
A or B

SCSI cable