Panasonic kx-tg5576m Manuale Utente
Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport
59
L
If the handset beeps 3 times, you
entered a wrong code. Enter “335”,
then press {OK}.
entered a wrong code. Enter “335”,
then press {OK}.
Registering the handset
If you want to use the handset with a
different base unit of the same model,
register it to that base unit. The handset
will be given a new extension number of
that base unit.
different base unit of the same model,
register it to that base unit. The handset
will be given a new extension number of
that base unit.
Important:
L
Before registering, make sure the base
unit and the other handsets are not
being used.
unit and the other handsets are not
being used.
L
Have the handset and base unit near
each other when registering the
handset.
each other when registering the
handset.
L
If you have already canceled the
handset registration at the previous
base unit, start from step 5.
handset registration at the previous
base unit, start from step 5.
1
Handset:
Press {MENU} (center of joystick).
Press {MENU} (center of joystick).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Registration”, then press
{
{
SELECT}.
4
Scroll to “HS registration”, then
press {SELECT}.
press {SELECT}.
5
Base unit:
Press and hold {INTERCOM} until the
CHARGE indicator flashes.
Press and hold {INTERCOM} until the
CHARGE indicator flashes.
L
After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
flashing, the rest of the procedure
must be completed within 1 minute.
6
Handset:
Press {OK} (right soft key), then wait
until the handset beeps.
Press {OK} (right soft key), then wait
until the handset beeps.
L
Registration is complete.
L
The handset’s new extension number
(! to )) will be displayed.
(! to )) will be displayed.
Set date & time O
Time adjustment (Caller ID
subscribers only)
subscribers only)
Using this feature, the unit’s date and time
setting will be automatically adjusted when
caller information is received. To turn this
feature on, select “Caller ID[auto]”.
To turn off, select “Manual”.
setting will be automatically adjusted when
caller information is received. To turn this
feature on, select “Caller ID[auto]”.
To turn off, select “Manual”.
1
Press {MENU} (center of joystick).
2
Scroll to O, then press {SELECT}.
3
Scroll to “Time adjustment”, then
press {SELECT}.
press {SELECT}.
4
Push the joystick up or down repeatedly
to select “Manual” or “Caller
ID[auto]”.
to select “Manual” or “Caller
ID[auto]”.
5
Press {SAVE}, then press {OFF}.
Note:
L
To use this feature, set the date and time
manually first (page 19).
manually first (page 19).
TG5571_5576.book Page 59 Friday, June 10, 2005 6:46 PM