HP 457626-001 Manuale Utente
Contents 78
Device number
Connector
System fan 1
P12 on the system board
System fan 2
P18 on the system board
System fan 3
P13 on the system board
System fan 4
P15 on the system board
System fan 5
P17 on the system board
System fan 6
P19 on the system board
System fans 1 to 5 are for the memory modules and processors, while system fan 6 is for the PCI slots and system
chipsets.
A new system fan can be installed to allow the server to operate properly in case a default system fan
becomes defective.
To remove the system fan:
To remove the system fan:
1.
Disconnect the fan cable from its corresponding board connector.
2.
Release the fan cable from the cable clip.
3.
Hold the system fan and lift it away from the chassis.
Figure 73
Removing the system fan
To install the system fan:
1.
Put the fan cable through the system fan bracket and secure the cable using the cable clip on the
chassis.
chassis.
2.
Hold the system fan and press it into the fan bracket.
3.
Connect the fan cable to its corresponding board connector.