Panasonic nv-gs33 Manuale Utente
Before Use
-13-
1
Pull the Viewfinder.
2
Adjust by turning the Eyepiece Corrector
Knob
Knob
(34)
.
To Use the Viewfinder at the Same Time as the
LCD Monitor
Set [LCD/EVF] >> [EVF ON/AUTO] >> [ON].
≥The Viewfinder does not turn off even if the LCD
LCD Monitor
Set [LCD/EVF] >> [EVF ON/AUTO] >> [ON].
≥The Viewfinder does not turn off even if the LCD
Monitor is opened.
≥When you turn the Movie Camera off, this
setting is cancelled.
ª Using the LCD Monitor
With the LCD Monitor open, you can also record
the picture while watching it.
the picture while watching it.
1
Put a finger on the [OPEN
4] Knob
(1)
and
pull the LCD Monitor
(2)
out in the direction
of the arrow.
≥The Viewfinder is deactivated.
≥The LCD Monitor can be opened a maximum
≥The Viewfinder is deactivated.
≥The LCD Monitor can be opened a maximum
of 120
o. If you open the LCD monitor by 120o,
it becomes convenient to operate menus or to
play back pictures.
play back pictures.
2
Adjust the LCD Monitor angle according to
the desired recording angle.
≥The LCD Monitor can rotate a maximum of
the desired recording angle.
≥The LCD Monitor can rotate a maximum of
180
o 1 from the vertical position upwards
and a maximum of 90
o 2 to the downward
direction. Forcefully rotating the LCD Monitor
beyond these ranges will damage the Movie
Camera.
beyond these ranges will damage the Movie
Camera.
12:30:45
15.10.2004
15.10.2004
12:30:45
15.10.2004
12:30:45
15.10.2004
15.10.2004
12:30:45
15.10.2004
(34)
(2)
(1)
290
o
1180
o
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
Push the LCD Monitor until it is securely locked.
ª Adjusting Brightness and Colour
Level
When [LCD/EVF SET] on the [LCD/EVF]
Sub-Menu is set to [YES], the following items are
displayed.
Sub-Menu is set to [YES], the following items are
displayed.
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD
screen.
LCD Colour Level [LCD COLOUR LEVEL]
Adjusts the colour saturation of the image on the
LCD screen.
Brightness of the Viewfinder
[EVF BRIGHTNESS]
Adjusts the brightness of the image in the
Viewfinder.
Adjusts the brightness of the image on the LCD
screen.
LCD Colour Level [LCD COLOUR LEVEL]
Adjusts the colour saturation of the image on the
LCD screen.
Brightness of the Viewfinder
[EVF BRIGHTNESS]
Adjusts the brightness of the image in the
Viewfinder.
To Adjust
Press the [
Press the [
;/∫] Button and select the item to be
adjusted, and then press the [
6/5] Button to
raise or lower the number of vertical bars in the
Bar Indication.
≥A larger number of vertical bars indicates
Bar Indication.
≥A larger number of vertical bars indicates
stronger brightness or colour saturation.
To Increase the Brightness of the Entire LCD
Monitor
Press the [POWER LCD] Button.
When you press [POWER LCD] button, the LCD
monitor becomes bright about twice as much as
usual.
Monitor
Press the [POWER LCD] Button.
When you press [POWER LCD] button, the LCD
monitor becomes bright about twice as much as
usual.
The [POWER LCD] Lamp
(23)
lights up.
≥When turning the power on with using AC
Adaptor, [POWER LCD] function is
automatically effective.
automatically effective.
To Resume Normal Brightness
Press the [POWER LCD] Button again.
Press the [POWER LCD] Button again.
≥These adjustments do not affect the recorded
images.
≥For other notes concerning this item, see
-44-
.
1LCD BRIGHTNESS
[-]||||----[+]
[-]||||----[+]
LCD COLOUR LEVEL
[-]||||----[+]
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
[-]||||----[+]
;/∫:SELECT &/%:SETUP
!/MENU:EXIT
LCD/EVF SETUP
POWER
LCD
(23)
33B-ENG.book 13 ページ 2004年2月4日 水曜日 午前11時55分