Panasonic nv-hs960am Manuale Utente

Adv

anced Oper

ations

Connect a 21-pin Scart cable (not supplied) to the AV2
21-pin Scart socket t on the VCR and to the 21-pin
Scart socket on the decoder.

Connect the decoder’s mains lead to an AC mains
socket.

Set “AV2” to “DECODER”.
For details, see page 46.

Hint:
≥

“RGB” means separate Red/Green/Blue colour signals. If
you connect a TV equipped with RGB input capability to the
AV1 socket s on this VCR, and a decoder equipped with
RGB output capability to the AV2 socket t, the TV can
receive RGB signal input from the decoder via the VCR.

To connect this VCR to a decoder or a stereo amplifier, make
the connections shown in the illustration below.
For the connection to the TV, see pages 10 and 11.

For details about the connection, also read the operating
instructions of the decoder or stereo amplifier.

Be sure to keep the VCR, TV and decoder or stereo amplifier
switched off until you have finished all connections.
For your safety, do not connect or handle the equipment with
wet hands.

Decoder here refers to the device used to decode scrambled
broadcasts (Pay TV).

Connect an Audio cable (not supplied) to the Audio
Output sockets w on the VCR and to Audio Input
sockets on the stereo amplifier.

Connect the stereo amplifier’s mains lead to an AC
mains socket.

w

Stereo amplifier (not supplied)

To an AC mains socket

Audio Input sockets

Audio cable
(not supplied)

t

Decoder (not supplied)

21-pin Scart socket

To an AC mains socket

21-pin Scart cable
(not supplied)