Panasonic SC-AK58 Manuale Utente
RQT5324
23
Recording from radio broadcasts
Preparation:
Insert the tape to be recorded on into deck 2.
Tape direction is automatically set to “ ”.
Change the tape direction if you want to start recording from the re-
verse side. (
Insert the tape to be recorded on into deck 2.
Tape direction is automatically set to “ ”.
Change the tape direction if you want to start recording from the re-
verse side. (
page 22)
1. Select a radio station.
(
page 15, steps 1 – 3)
2. Press [REV MODE] to select the reverse mode.
Every time you press the button;
: One side is recorded, then recording stops automatically.
,
: Both sides (front side
reverse side) are recorded,
then recording stops automatically.
3. Press [ REC/STOP] to start recording.
If you selected
in step 2, the direction will automatically
change to
when recording starts.
To stop recording
Press [ REC/STOP] again.
Recording can also be stopped by pressing [ ].
Press [ REC/STOP] again.
Recording can also be stopped by pressing [ ].
To cut an unnecessary part while recording
1. Press [ REC/STOP] during the unnecessary part. The cassette
1. Press [ REC/STOP] during the unnecessary part. The cassette
deck will stop.
2. Press [ REC/STOP] to resume recording again. Recording will
continue in the same direction as before.
Note
When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.
when you start and stop the recording.
Press [
, FM MODE/BP] while recording.
Each time you press the button, “BP1” and “BP2” will be displayed al-
ternately.
Select the position where there is less noise.
ternately.
Select the position where there is less noise.
2
3
Tape direction
2
FM MODE/BP
3
To reduce noise while AM recording
(Beat proof function)
(Beat proof function)
Recording operation