Panasonic saxr70 Manuale Utente

R

Q

T

7525

• When you turn the dimmer to “ON” or turn HQ sound mode on, the following indicators will dim.

• When the input signal is multi-channel DVD-Audio using a HDMI connection, DIGITAL INPUT may not display correctly.

Standby indicator [^] 

When the unit is connected to the
AC mains supply, this indicator
lights up in standby mode and
goes out when the unit is turned
on. 

Standby/on switch [8] 

Press to switch the unit from on to
standby mode or vice versa. 
In standby mode, the unit is still
consuming a small amount of
power.

For selecting speakers A or B. 
To use BI-WIRE, press [A]
and [B] at the same time.
Turning the speakers off
automatically engages the
STEREO/2CH MIX mode
(when listening through
headphones, for example).

Lights when the BI-AMP
function is activated.

[% DIGITAL, % EX/PL Ⅱx, % PL Ⅱ, 

Lights to indicate the source’s input signal and
decoding format used.
% DIGITAL: Dolby Digital sources 
% EX/PLⅡx: Dolby Digital Surround EX sources

or Dolby Pro Logic Ⅱx decoder is
being used.

% PLⅡ : Dolby Pro Logic Ⅱ decoder is being used. 

DTS 96/24: DTS 96/24 sources 
DTS-ES: DTS-ES discrete or matrix sources 
DTS: DTS sources 
DTS NEO:6:DTS NEO:6 matrix decoder is

being used.

Press to enter Multi
control, and use [INPUT
SELECTOR] to select/
enter.

For selecting input. 
Selects/Enters each setting
in Multi control.

Volume control.

For turning on the 6.1 channel decoding mode. When using this mode
the indicator lights.

For turning on the bass synthesizer mode. When using this mode the
indicator lights.

For selecting a re-master mode. When using this mode the indicator
lights.

[TUNE 2, 1] 

For tuning the radio and selecting preset stations. 
Press and hold until the frequency starts scrolling to start automatic
tuning. Tuning stops when a station is found.

Lights when using 
HQ sound mode.

Lights when the signals
have been established
with a HDMI connection.

Headphone jack 
Plug type: 6.3 mm
stereo 
• Avoid listening for

prolonged periods of
time to prevent
hearing damage.

• Turn the speakers off

when using the
headphones. 

[–SPEAKERS–  ,  , 

Speaker indicators 



:Sound is output from speakers

connected to the front A,
surround, and center terminals.



: Sound is output only from

speakers connected to the
front B terminals. 

 

: Sound is output from

speakers connected to the
front A and B terminals.

: Sound is output from

speakers connected by
Bi-wiring.

[TUNED, ST,  , MONO] 

Radio indicators 
TUNED: A station is tuned. 
ST: A stereo FM broadcast is

tuned.



: Flashes during automatic

presetting. 

MONO: Lights when using the

monaural mode.

Sleep timer indicator.

: Lights while RDS signals

are being received.

PS, PTY: Indicates the current

RDS display mode.

SFC: Lights when using an SFC mode.
CENTER FOCUS: Lights when using

the center focus
mode.

2CH MIX: Lights when playing a multi-

channel source in 2CH MIX
mode.

MULTI REAR: Lights when using the multi

rear surround mode.

When you press the [MULTI CONTROL]
button and enter the settings the
indicator lights.

[–DIGITAL INPUT–, L, C, R, 
S, LS, SB, RS, LFE]

Program format indicators 
Show the channels contained in
the digital input signal. They do
not light when input is analogue.
L: Front left channel 
C: Center channel 
R: Front right channel 
S: If the surround channel is

monaural. 

LS: Surround left channel 
SB: Surround back channel 
RS: Surround right channel 
LFE (Low Frequency Effects):

Deep-bass effect.

Lights when the tape monitor is
on.

Displays the frequency the unit is
processing.

Shows the input mode, radio
frequency, and other general
information.

Frequency unit indicators 
kHz: AM, or PCM sampling

frequency 

MHz: FM 

SPEAKERS

A

B

 

8

6.1CH DECODING

VCR 2

PHONES

^

MULTI CONTROL

INPUT SELECTOR

VOLUME

DOWN

UP

PUSH ENTER

BI-AMP

BI-WIRE

VIDEO IN

AUDIO IN

L

R

S-VIDEO IN

For a video camera, 
etc.