Panasonic sa-ht17 Manuale Utente
7
RQT7
94
9
Speak
er setup
Step 1
7.5 -9.4 mm
SC-HT16 SC-HT15
3.0-4.0 mm
180 mm
(7-1/16”)
174 mm
(6-7/8”)
Screw
(not included)
(not included)
Attaching to a wall
Wall or pillar
30 - 35 mm
(1-3/16” - 1-3/8”)
7 - 9 mm (9/32” - 11/32”)
Surround speakers
(19/64” - 3/8”)
(1/8” - 5/32”)
2
SC-HT17
SC-HT16 SC-HT15
CENTER
FRONT (R)
FRONT (L)
SURROUND
(L)
(L)
2
1
4
3
5
SURROUND
(R)
(R)
4
3
1
5
2
6 Ω
FRONT
4 Ω
CENTER
4 Ω
SURROUND
R
L
R
L
Connect the speaker cables to the subwoofer.
Subwoofer
Copper
Silver
Silver
Note
Never short-circuit positive (+)
and negative (–) speaker wires.
and negative (–) speaker wires.
Copper
Silver
Silver
Other speaker setup options
• The wall or pillar on which the speakers are to be attached should be capable of
supporting 10 kg (22 lb.) per screw. Consult a qualified building contractor when
attaching the speakers to wall. Improper attachment may result in damage to the wall
and speakers.
attaching the speakers to wall. Improper attachment may result in damage to the wall
and speakers.
• When mounting the speakers to walls, use a string (not included) to prevent them
from falling (
è
page 6).
• (SC-HT17: front and surround speakers, SC-HT16 and SC-HT15: front speakers)
Use of optional speaker cables are recommended when mounting. (You can also
remove the speaker cables from the pipes supplied with this system.)
remove the speaker cables from the pipes supplied with this system.)
Fitting optional speaker stands
SC-HT16 SC-HT15
60 mm
(2-23/64”)
Plate thickness +7 to 10 mm
(9/32” - 25/64”)
Speaker
stands (not
included)
stands (not
included)
Surround speakers
• Observe the diameter and length of the
screws and the distance between screws
as shown in the diagram.
as shown in the diagram.
• The stands must be able to support over
10 kg (22 lb.).
• The stands must be stable even if the
speakers are in a high position.
5 mm, Pitch 0.8 mm
SC-HT17PP-EN.fm Page 7 Thursday, March 17, 2005 9:56 AM