Panasonic sc-ak78 Manuale Utente

RQT5289

If you set the timer incorrectly
Repeat the procedure from step 1.

To check settings
While the unit is on and the “   PLAY” (or   REC) indicator is on, press

[CLOCK/TIMER] so “   PLAY” (or   REC) appears on the display.
Two seconds after “   PLAY” (or   REC) appears, the settings are dis-

played in the following order.
• For play timer

          • For record timer

 Play start time

 Recording start time

 Play end time

 Recording end time

 Play source

 Recording source

 Playback volume

To enjoy the desired source after the timer setting is completed
The volume level and music source are stored in the timer memory and
the timer will start in these preset conditions. However the Disc number
and reverse mode do not get stored in the timer memory.
1. After step 7, turn on the unit and start playing the desired source.
2. Reset the Disc number and reverse mode if you have changed any of

them, confirm that a Disc or cassette is inserted, then press [POW-
ER] to put the unit on standby.

Turning the timer ON/OFF
One of the timers is on when the [   PLAY/   REC] button is alight.
When the unit is on (or off and NORMAL mode) you can confirm which
is on by checking the indicators on the display.
When the unit is off and in ECO mode, press [CLOCK/TIMER].
The display will then show which timer is on and the settings that have
been made (see above).
To change the timer, press [   PLAY/   REC].

Each time the button is pressed the setting changes as follows.

• If the power is on, the timer will not function. The system must be in

the standby mode.

• If you switch the power to the standby mode while the play/record tim-

er is functioning, the OFF time setting will not be activated.

• If “AUX1/2” or “6CH DISCRETE INPUT” is selected as the source,

when the timer comes ON, the system will turn ON and will engage
“AUX1/2” or “6CH DISCRETE INPUT” as the source. If you want to
playback or record from a connected component, set the component’s
timer to the same time. (See the instruction manual that came with the
component.)

• The play timer cannot be used in combination with the record timer.

This timer turns power to your system OFF at the set time (Max. 2
hours, settable at 30 minute intervals). It lets you fall asleep listening
to music.

The figure shows how to set the system to standby mode after 30
minutes.

SLEEP

AUTO OFF

CH SELECT

AV EFFECT

EQ

MUTING

DISC

3D AI

SLEEP

   PLAY        REC      (off)

Every time you press the button;

The system is turned off after the set time has elapsed.

To cancel the sleep timer:
Press [SLEEP] to select “OFF”.

To confirm the remaining time:
(only while power is ON)
Press [SLEEP].

To change the time remaining during operation:
Press [SLEEP] to show the remaining time then press [SLEEP] to se-
lect the desired time.

• The sleep timer turns OFF automatically the moment you attempt to

edit-record a CD using CD Manager function.

• The sleep timer can be used in combination with the play/record

timer.
The sleep timer always has priority.
Be sure not to overlap timer settings.

30     60     90     120     OFF