Panasonic sdr-h250gc Manuale Utente
155
LSQT1212
Recording
≥ When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
set the iris/gain value.
∫ Manual shutter speed adjustment
≥ Avoid recording under fluorescent light,
≥ Avoid recording under fluorescent light,
mercury light or sodium light because the
colour and brightness of the playback image
may change.
colour and brightness of the playback image
may change.
≥ If you increase the shutter speed manually, the
gain value will increase automatically
depending on how much the sensitivity lowers
and the noise on the screen may increase.
depending on how much the sensitivity lowers
and the noise on the screen may increase.
≥ You may see vertical lines of light in the
playback image of a brightly shining subject or
highly reflective subject, but this is not a
malfunction.
highly reflective subject, but this is not a
malfunction.
≥ During normal playback, image movement
may not look smooth.
≥ When recording in an extremely bright place,
the screen may change colour or flicker. If so
adjust the shutter speed manually to [1/50] or
[1/100].
adjust the shutter speed manually to [1/50] or
[1/100].
∫ Manual iris/gain adjustment
≥ If the gain value is increased, the noise on the
≥ If the gain value is increased, the noise on the
screen increases.
≥ Depending on the zoom magnification, there
are iris values that are not displayed.
LSQT1212_GC(EN).book 155 ページ ２００７年２月１５日 木曜日 午前１０時１３分