Panasonic TY-WK42PR1 Manuale Utente
3
English
Components
Points to note during installation
•
The wall-hanging bracket is for use in installing the Wide Plasma Display to a vertical wall for
viewing purposes. Do not use it for any type of installation other than vertical wall installation.
viewing purposes. Do not use it for any type of installation other than vertical wall installation.
•
In order to ensure correct, problem-free operation of the Wide Plasma Display , do not
install the Display in any of the following places.
install the Display in any of the following places.
• Places which are next to sprinklers or sensors
• Places which are subject to vibration or shocks
• Places which are close to high-voltage wires or electric motors
• Places in direct contact with air from heaters
• Places which are subject to vibration or shocks
• Places which are close to high-voltage wires or electric motors
• Places in direct contact with air from heaters
•
When installing this wall-hanging bracket unit, use a fixing method appropriate to the type
of wall.
of wall.
•
Use an M6 bolt (sold separately) appropriate for the type of wall material (wood, steel
frame, concrete, etc.) the bracket is to be mounted on.
frame, concrete, etc.) the bracket is to be mounted on.
•
Keep retention screws and power cord away from any metallic parts or structures within
the wall.
the wall.
•
Insert the power cord plug for the Wide Plasma Display into a wall outlet which is close and
easily accessible.
easily accessible.
•
Provide adequate ventilation so that the temperature around the display does not rise
above 40°C (104 F°). If there is insufficient movement of the air inside display, heat may
build up inside the display, and fire may result.
above 40°C (104 F°). If there is insufficient movement of the air inside display, heat may
build up inside the display, and fire may result.
Wall-hanging bracket unit ..................................................1
Allen key (accessory) ......1
Fixing screw
(
M5-35)........................2
Insulating spacer
....................................4
Toothed pan washer
....................................4
Pan head bolt with
hex socket (M8-45) .........4