Panasonic th-37lrt12u Manuale Utente

Safety Precautions

This LCD Display is for use only with the following optional accessories. Use with any other type of optional

accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Panasonic Corporation.)

CAUTION

When using the LCD Display

Do not bring your hands, face or objects close to the

ventilation holes of the Display.
•  Top  of  the  Display  is  usually  very  hot  due  to  the  high
temperature  of  exhaust  air  being  released  through  the
ventilation holes. Burns or personal injuries can happen if
any body parts are brought too close. Placing any object
near the top of the display could also result in heat damages
to the object as well as to the Display if its ventilation holes
are blocked.
Be  sure  to  disconnect  all  cables  before  moving  the

Display.

• Moving the Display with its cables attached might damage

the cables which, in turn, can cause fire or electric shock.

Disconnect the power plug from the wall outlet as a

safety precaution before carrying out any cleaning.

• Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it from

becoming dusty.

• Built-up dust on the power cord plug can increase

humidity which might damage the insulation and cause

fire. Unplug the cord from the wall outlet and clean it
with a dry cloth.

This Display radiates infrared rays, therefore it may
affect other infrared communication equipment.

Install your infrared sensor in a place away from direct

or reflected light from your Display.
Note:
Image retention may occur. If you display a still picture for
an extended period, the image might remain on the screen.
However, it will disappear after a while.

• Wall-hanging bracket (angled) ..................................................TY-WK32TM1
• Wall-hanging bracket  ...............................................................TY-WK32TM2
• ATSC Tuner for Hospitality  .......................................................Enseo DTB1510 / Enseo DTB1510 TB
• Main Board (32")  ......................................................................TNM4CD0819FA
• Main Board (37")  ......................................................................TNM4CD0819FB
• Power Board (32")  ....................................................................TNM4CD0821F
• Power Board (32"/37")  .............................................................TNM4CD0822F
• IR Board  ...................................................................................TNM4CD0906F
• RS232 Board ............................................................................TNM4CD0820F
•SW+AV3 Board (37")  ................................................................TNM4CD0807F
• Key Board (32")  ........................................................................TNM4CD0809F
• AV3 Board (32")  .......................................................................TNM4CD0810F
• SPEAKERS  ..............................................................................TTX4CM008C

Always be sure to ask a qualified technician to carry out set-up.

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard
unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being
played with by young children, creating the potential risk of suffocation.

To Prevent the Display From Falling

Required accessories:

Holding Strip (1)

Assembly screw (1)
size: 4 mm x 10

Wood screw (1)

1. Use the wood screw to attach the holding strip

to the base table (C).

Note:
If the base table has no hole, align with the hole
on the holding strip and dig one on the base
table.

2. Screw the holding strip to the pedestal (B).

Note:
Make sure that the holes on the holding strip are
properly aligned with the pedestal and the base
table to ensure stability and prevent the Display
from falling down.