Panasonic th-42bt300w Manuale Utente

Pagina di 76
46
Setup menu
• Sync
This function operates only during input from PC IN terminal.
Setting RGB sync signal
Confi rm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto:  The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
on G:  Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS:  Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
Setting Component sync signal
Confi rm that the input is set to Component input (this setting is valid only for Component input signal).
Auto:  The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
on Y:  Uses a synchronized signal on the Video Y signal, which is input from the Y connector.
Note:
Signals input to COMPONENT/RGB IN terminals correspond to Sync on G or Sync on Y. 
• SDI Through
Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).
Off 
 On
On: Enables active through.
Off: Disables active through.
Note:
Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board 
(TY-FB11DHD) is selected.
• FRAME CREATION
Automatically compensates the picture frame rate and removes juddering movements to make the images 
smooth.
Off 
 Mid 
 Max
Note:
Depending on the contents, images may be noisy. To prevent the noise, change the setting.
• 3D Refresh Rate
Reduces juddering or fl icker of image due to lighting interference during 3D viewing.
100Hz 
 120Hz
Note:
This setting is disabled when “FRAME CREATION” is set to “Off”.
• HDMI Range
Switches the dynamic range according to the input signal from HDMI terminal.
Video(16-235) 
 Full(0-255) 
 Auto
Video(16-235): If the input signal is the video range,  Example: HDMI terminal output for DVD player
Full(0-255): If the input signal is full range,  Example: HDMI terminal output for personal computer
Auto: Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.
Note:
This function can be set only for HDMI signal input.
• SDI Signal Format
This menu is available only when selecting a slot that the Dual HD-SDI Terminal Board for 3D (TY-FB30DHD3D) is 
installed and set the input signal format for the board. 
Auto 
 YCbCr(4:2:2) 10bit 
 YCbCr(4:2:2) 10bit 60p/50p 
 YCbCr(4:4:4) 10bit 
 RGB(4:4:4) 10bit 
 YCbCr(4:2:2) 12bit 
 YCbCr(4:4:4) 12bit 
 RGB(4:4:4) 12bit 
 XYZ(4:4:4) 12bit
Auto: Automatically selects the signal format according to the input signal.