Panasonic th70lf50u Manuale Utente

Notes:
•  Computer signals which can be input are those with a horizontal scanning frequency of 30 to 110 kHz and vertical scanning 

frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

•  The display resolution is a maximum of 1,440 × 1,080 dots when the aspect mode is set to “4:3”, and 1,920 × 1,080 dots  

when the aspect mode is set to “FULL”. If the display resolution exceeds these maximums, it may not be possible to show 
 ne detail with suf cient clarity.

•  The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will need 

to make setting changes to the computer at the time of connection.

•  Some PC models cannot be connected to the set.
•  There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.
•  The computer shown in the illustration is for example purposes only.
•  Additional equipment and cables shown are not supplied with this set.
• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the speci ed 

frequency range.

Pin Layout for PC Input 
Terminal

Pin No.

Signal Name

Pin No.

Signal Name

Pin No.

Signal Name

1

R

6

GND (Ground)

11

NC (not connected)

2

G

7

GND (Ground)

12

SDA

3

B

8

GND (Ground)

13

HD/SYNC

4

NC (not connected)

9

+5 V DC

14

VD

5

GND (Ground)

10

GND (Ground)

15

SCL

1 

6 

7 

8 

3 

9 

4 

5 

10 

15 14 13 12 11 

2 

Conversion adapter 
(if necessary)

(Male)

RGB

Mini D-sub 15p

Stereo mini plug (M3)

Shared with DVI-D IN.

Audio

Connect a cable which matches
the audio output terminal on the computer.

(Female)

COMPUTER