Panasonic th70lf50u Manuale Utente

Notes:
•  To use a DHCP server, make sure the DHCP server 

is started.

•  

During a DHCP server is used, IP ADDRESS, 

SUBNET MASK, and GATEWAY values cannot be 

entered.

•  

When the set values are changed properly, 

“NETWORK SETTING CHANGED.” message and 

the changed set items are displayed.

DHCP

Set to ON when a DHCP server is 
used, or OFF when it is not used.

IP ADDRESS

Enter an IP address.

SUBNET MASK Enter a subnet mask.

GATEWAY

Enter a gateway address.

PORT

Enter the port number used for 
command control. The available 
setting range is 1024 - 65535.

LAN SPEED

Set the connection speed of the LAN 
environment.

NETWORK ID

Set the ID to identify this unit. The 
available setting range is 0 - 99.

SAVE

Save the each set value.

•  

The default password is “Panasonic”.

•  Up to 32 alphanumeric characters can be used for a 

password.

•  

When the password is changed properly, “Password 

has changed.” message is displayed.

OLD 

PASSWORD

Enter the old password.

NEW 

PASSWORD

Enter the new password.

NEW 

PASSWORD
(RETYPE)

Enter the password entered in “NEW 

PASSWORD” for con rmation.

SAVE

Save the new password. The 
con rmation screen is displayed.  
Click OK to change the password.

Click NETWORK SETTING from the menu. Various settings of a network can be set. For the details of the setting 
items, please check NETWORK SETUP under the SET UP of the unit. (see page 45)

Click CHANGE PASSWORD from the menu. Password to access the Web browser control can be set. When 
the password is changed in this screen, the password used for command control and the PJLink™ security 
authentication is also changed.