Panasonic th70lf50u Manuale Utente

Safety Precautions

WARNING

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning
cloth or a soft, lint-free cloth.

• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral

detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

• Do not scratch or hit the surface of the panel with ngernails or other hard objects, otherwise the surface may become

damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise
the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added

and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

• Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside the

unit, operating problems may result.

• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet

surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact
with articles made from rubber or PVC.

Usage of a chemical cloth

• Do not use a chemical cloth for the panel surface.
• Follow the instructions for the chemical cloth to use it for the cabinet.

Maintenance

Setup

Do not place the Display on sloped or unstable
surfaces, and ensure that the Display does not hang
over the edge of the base.

• The Display may fall off or tip over.

Do not place any objects on top of the Display.

• If water spills onto the Display or foreign objects get

inside it, a short-circuit may occur which could result in
re or electric shock. If any foreign objects get inside the
Display, please consult an Authorized Service Center.

Do not cover the ventilation holes.

• Doing so may cause the Display to overheat, which can

cause re or damage to the Display.

Transport only in upright position!

• Transporting the unit with its display panel facing upright

or downward may cause damage to the internal circuitry.

For suf cient ventilation;
Leave a space of 3

15/16

” (10 cm) or more at the top, left

and right, and 2

3/4

” (7 cm) or more at the rear, and also

keep the space between the bottom of the display and
the oor surface.
Cautions for Wall Installation

• Wall installation should be performed by an installation

professional. Installing the Display incorrectly may lead
to an accident that results in death or serious injury. Use
the speci ed optional accessories.

• When installing the Display vertically, be sure to install

the power indicator onto the top of the Display.

Caution for Ceiling Suspension

• Ceiling suspension should be performed by an installation

professional. Installing the Display incorrectly may lead to
an accident that results in death or serious injury.

An apparatus with CLASS I construction shall be
connected to a mains socket outlet with a protective
earthing connection.
Do not install the product to a place where the product
is exposed to direct sunlight.

• If the screen is exposed to direct sunlight, the liquid

crystal panel may have adverse effect.

AC Power Supply Cord

The Display is designed to operate on 110 - 127 V AC, 50/60 Hz.
Ensure that the mains plug is easily accessible.
Do not use any power supply cord other than that
provided with this unit.

• Doing so may cause re or electric shocks.

Securely insert the power cord plug as far as it will go.

• If the plug is not fully inserted, heat may be generated

which could cause re. If the plug is damaged or the
wall socket plate is loose, they should not be used.

Do not handle the power cord plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that might damage the power cable.
When disconnecting the power cable, hold the plug,
not the cable.

• Do not make any modi cations, place heavy objects on,

place near hot objects, heat, bend, twist or forcefully
pull the power cable. Doing so may cause damage to
the power cable which can cause re or electric shock.
If damage to the cable is suspected, have it repaired at
an Authorized Service Center.

If the Display will not be used for a long period of time,
unplug the power cord from the wall outlet.

If problems occur during use

If a problem occurs (such as no picture or no sound),
or if smoke or an abnormal odor is detected from the
Display, unplug the power cord immediately.

• Continuous use of the Display under these conditions

might cause re or permanent damage to the unit.
Have the Display evaluated at an Authorized Service
Center. Services to the Display by any unauthorized
personnel are strongly discouraged due to its high
voltage dangerous nature.

If water or foreign objects get inside the Display, if the
Display is dropped, or if the cabinet becomes damaged,
disconnect the power cord plug immediately.

• A short may occur, which could cause re. Contact an Authorized

Service Center for any repairs that need to be made.