Panasonic wv-cs600 Manuale Utente

- 31 -

1. Remove the mounting screw (M3) from the

camera mounting angle (provided).

2. Mark the mounting holes on the ceiling, using

the removed camera mounting angle as a
template.

Marking

3. Fix the camera mounting angle to the ceiling

with four screws (not provided).

The installation should be strong enough
to support 4 times the total weight.

Be sure to protect the video and power

cables. Otherwise, the cut edges will
damage the cables.

Diecast Case

Reverse the disassembly procedure.  Take
care not to cut any cables.

1. The following installation work should be

referred to qualified service personnel or
system installers and must conform with local
codes.

2. Be sure to select a ceiling board that is strong

enough to support this camera.

3. To mount the camera on any other kind of

ceiling, use the optional ceiling bracket WV-
Q105, WV-Q106 or WV-Q107.

4. To mount the camera on the wall, use the

optional wall mount bracket WV-Q108.

Prepare a cutout in the diecast case and
decoration cover as shown in the following
drawing.

PAL (CCIR) or
NTSC (EIA)

DIP 

φ

OFF

NTSC (EIA)

ON

PAL (CCIR)

The dip switch 

φ

is not for changing NTSC

(EIA) to PAL (CCIR) or PAL (CCIR) to NTSC
(EIA).  This switch is set at factory.  Do not
change the setting of this switch.  The factory
setting is ON.