Panasonic wv-cm146 Manuale Utente
-5-
RECOVER:
This terminal is used to reset the spot camera pic-
ture, and return to the sequential operation by
receiving the recover signal.
ture, and return to the sequential operation by
receiving the recover signal.
@1
Timing Select Output Connector (TIMING SELECT,
OUT)
OUT)
This connector supplies the timing pulse signals for
switching in the sequence operation of other extensible
systems, such as another CCTV system or sequential
switcher. This connector sends the signal that is sup-
plied to the TIMING SELECT IN connector.
switching in the sequence operation of other extensible
systems, such as another CCTV system or sequential
switcher. This connector sends the signal that is sup-
plied to the TIMING SELECT IN connector.
@2
Timing Select Input Connector (TIMING SELECT,
IN)
IN)
This connector receives the external timing pulse for
the sequential operation of the time lapse VTR or
another CCTV system.
the sequential operation of the time lapse VTR or
another CCTV system.
@3
Audio Input Connector (AUDIO IN)
This connector receives the audio signal from an exter-
nal source, such as a VTR, for monitoring sounds from
the internal speaker.
Connect an audio cable between this connector and
the AUDIO OUT connector of external equipment.
nal source, such as a VTR, for monitoring sounds from
the internal speaker.
Connect an audio cable between this connector and
the AUDIO OUT connector of external equipment.
@4
Audio Output Connector (AUDIO OUT)
This connector supplies the audio signal to external
equipment.
Connect an audio cable between this connector and
the AUDIO IN connector of external equipment.
equipment.
Connect an audio cable between this connector and
the AUDIO IN connector of external equipment.
@5
Power Cord
Caution:
Caution:
The supplied power cord is designed for use
on a 220 - 240 V AC source only.
@6
Playback Input Connector (PLAY IN)
This connector receives the video signal from an exter-
nal source such as a VTR for monitoring.
Connect a video cable between this connector and the
VIDEO OUT connector of external equipment.
nal source such as a VTR for monitoring.
Connect a video cable between this connector and the
VIDEO OUT connector of external equipment.
Note:
Set the INPUT SELECT switch to
"
VTR
"
to moni-
tor VTR pictures.
@7
Record Output Connector (REC OUT)
This connector supplies the video signal of the cam-
eras to an additional monitor or VTR.
The video signal of the camera is supplied to this con-
nector even if the DISPLAY MODE switch is set to
eras to an additional monitor or VTR.
The video signal of the camera is supplied to this con-
nector even if the DISPLAY MODE switch is set to
"
STAND BY.
"
@8
Camera Input Connectors (CAMERA INPUT 1/2/3/4,
VP CAMERA)
VP CAMERA)
These connectors are used to connect a single coaxial
cable to the specified VP Multiplexed Cameras.
These connectors supply DC power and vertical drive
pulse to the cameras, and receive video signals from
the cameras.
cable to the specified VP Multiplexed Cameras.
These connectors supply DC power and vertical drive
pulse to the cameras, and receive video signals from
the cameras.
Notes:
•
Be sure to connect only the Specified VP
Multiplexed Cameras.
Multiplexed Cameras.
•
If a camera is connected while monitor power is
on, the camera will be prevented from normal
operation by the protection circuit for misconnec-
tion.
on, the camera will be prevented from normal
operation by the protection circuit for misconnec-
tion.
•
The Specified System Cameras can be connected
to these connectors instead of the VP Multiplexed
Cameras.
to these connectors instead of the VP Multiplexed
Cameras.
Caution:
Set the CAMERA POWER ON/OFF switch to
"
OFF
"
before connecting the Specified System Cameras
to these connectors.
Specified System Camera: Panasonic VD2 multi-
to these connectors.
Specified System Camera: Panasonic VD2 multi-
plexed camera
@9
Camera Input Connectors (CAMERA INPUT 5/6/7/8,
CAMERA)
CAMERA)
These connectors are used to connect a single coaxial
cable to the Specified System Cameras.
cable to the Specified System Cameras.
#0
Focus Control
This control is preset at the factory.
Do not turn this control. When adjustment is required,
ask a qualified service person for help.
Do not turn this control. When adjustment is required,
ask a qualified service person for help.
#1
Camera Power On/Off Switch (CAMERA POWER,
ON/OFF)
ON:
ON/OFF)
ON:
Set to this position to use the VP Multiplexed
Cameras.
OFF:
Set to this position to use the Specified System
Cameras (VD2).
No power supply to the cameras.
No power supply to the cameras.
Caution:
Set this switch before connecting the cam-
eras. Otherwise, it may damage the cameras.