Panasonic wv-cu550 Manuale Utente
-2-
PREFACE
The WV-CU550A System Controller, when combined with
the optional WJ-SX550A Matrix Switcher and WJ-AD550
Extension Unit, allows for flexible control of 128 cameras
and 16 monitors.
When used in a system with either Receivers (WV-RC100,
WV-RC150 or WV-RC170) or with Combination cameras
(WV-BS200, WV-CS300, WV-CS500 or WV-CS600), the
WV-CU550A can control camera functions such as zoom
and focus and can also control accessory equipment such
as Pan/Tilt Heads.
In addition, the WV-CU550A can control sequential switch-
ing in systems programmed by the Set Up Menu of the
WJ-SX550A Matrix Switcher.
the optional WJ-SX550A Matrix Switcher and WJ-AD550
Extension Unit, allows for flexible control of 128 cameras
and 16 monitors.
When used in a system with either Receivers (WV-RC100,
WV-RC150 or WV-RC170) or with Combination cameras
(WV-BS200, WV-CS300, WV-CS500 or WV-CS600), the
WV-CU550A can control camera functions such as zoom
and focus and can also control accessory equipment such
as Pan/Tilt Heads.
In addition, the WV-CU550A can control sequential switch-
ing in systems programmed by the Set Up Menu of the
WJ-SX550A Matrix Switcher.
PRECAUTIONS
• All necessary procedures, with regards to the installa-
tion of this unit should be made by qualified service
personnel or system installers.
personnel or system installers.
• Do not attempt to disassemble the unit.
In order to prevent electric shock, do not remove
screws or covers. There are no user-serviceable parts
inside.
Do refer all servicing to qualified service personnel.
screws or covers. There are no user-serviceable parts
inside.
Do refer all servicing to qualified service personnel.
• Handle the unit with care.
Do not abuse the unit. Avoid striking, shaking, etc. It
could be damaged by improper handling or storage.
could be damaged by improper handling or storage.
• Do not expose the unit to rain or moisture, or try to
operate it in wet areas.
Do take immediate action if the unit becomes wet.
Turn the power off and refer servicing to qualified ser-
vice personal. Moisture can damage the unit and also
create the danger of electric shock.
Do take immediate action if the unit becomes wet.
Turn the power off and refer servicing to qualified ser-
vice personal. Moisture can damage the unit and also
create the danger of electric shock.
• Do not use strong or abrasive detergents when clean-
ing the unit body.
Do use a dry cloth to clean the unit when dirty.
In case the dirt is hard to remove, use a mild deter-
gent and wipe gently.
Do use a dry cloth to clean the unit when dirty.
In case the dirt is hard to remove, use a mild deter-
gent and wipe gently.
• Do not operate the unit beyond its temperature,
humidity or power source ratings.
Do not use the unit in an extreme environment where
high temperature or high humidity exist.
Use the unit under conditions where temperatures are
within
Do not use the unit in an extreme environment where
high temperature or high humidity exist.
Use the unit under conditions where temperatures are
within
−
10°C - +50°C (14°F - 122°F), and humidity is
below 90%.
The input power source is 220 - 240V AC 50 Hz.
The input power source is 220 - 240V AC 50 Hz.
FEATURES
The WV-CU550A System Controller, when combined with
the WJ-SX550A Matrix Switcher and WJ-AD550 Extension
Unit enables control of the following functions:
the WJ-SX550A Matrix Switcher and WJ-AD550 Extension
Unit enables control of the following functions:
• Routing of up to 128 cameras to any one of 16 moni-
tors.
• Remote control of up to 128 cameras and auxiliary
equipment, by using optional receivers and acces-
sories, including:
sories, including:
1. Remote control of Pan-Tilt Head and Camera
Housing.
2. Remote control of Motorized Zoom Lenses:Focus,
Zoom and Iris.
3. Remote control of camera settings, including
Electronic Sensitivity Up, Electronic Shutter,
Electronic Zoom, and more.
Electronic Zoom, and more.
• Selection of various sequence functions such as
Program Sequence, Tour Sequence and Group
Sequence.
Sequence.
Additional features of the WV-CU550A include:
• Up to 8 WV-CU550A Systems Controllers can be con-
nected in a system by using standard RS-485 two
twisted-pairs. Standard communications mediums
such as modem, fiber and microwave can also be
used.
twisted-pairs. Standard communications mediums
such as modem, fiber and microwave can also be
used.
• Ergonomic design reduces the number of switches to
only those with common functions. Secondary func-
tions are accessed through function keys.
tions are accessed through function keys.
• Flexible design allows for either table-top or rack-
mounting.