JVC hr-j770 Manuale Utente
Filename [HR-J770EU1.fm]
Masterpage:Left
18
EN
PLAYBACK (cont.)
Variable Speed Search
During playback or still, turn the SHUTTLE ring to the
right for forward variable-speed search, or to the left for
reverse variable-speed search (refer to the illustration on
page 17).
right for forward variable-speed search, or to the left for
reverse variable-speed search (refer to the illustration on
page 17).
OR
During still picture, press
w or e.
● The more times you press, the faster the playback picture
moves.
● To decrease speed, press the button for the opposite direction.
Manual Tracking
Your video recorder is equipped with automatic tracking control.
During playback, you can override this and adjust the tracking
manually by pressing the PR buttons.
During playback, you can override this and adjust the tracking
manually by pressing the PR buttons.
1
Override automatic tracking.
Press
p on the remote control.
2
Adjust the tracking manually.
Press PR + or –.
3
Return to automatic tracking.
Press
p on the remote control.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
tracking mode automatically.
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
Timer mode is disengaged.
Activate Instant ReView.
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
● The front display panel tells you how many programmes have
been timer-recorded. If you have, for example, 3 programmes,
“REVIEW” and “3” appear and blink. To watch the first of the 3
programmes, press REVIEW three times. The recorder searches
and begins playback automatically. You can access a
programme as far as 9 index codes away from the current tape
position.
“REVIEW” and “3” appear and blink. To watch the first of the 3
programmes, press REVIEW three times. The recorder searches
and begins playback automatically. You can access a
programme as far as 9 index codes away from the current tape
position.
● The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Programme
Recording (
Recording (
墌
pg. 30).
To resume normal playback, press
4.
HRJ670EU1.fm Page 18 Thursday, January 13, 2000 2:24 PM