JVC hr-j770 Manuale Utente

Filename [HR-J770EU2.fm]

Masterpage:Right

SYSTEM CONNECTIONS

Connecting To A Satellite Receiver

Connect the decoder to the satellite receiver’s connector
if you have a decoder, AV1 (L-1) IN/OUT connector to
TV’s connector, and AV2 (L-2) IN/DECODER connector
to the satellite receiver’s connector. Then connect the
satellite receiver and TV.

NOTES:

● Set “L-2 SELECT” to “L-2” (

墌

pg. 39).

● You can use Automatic Satellite Programme Recording

function (

墌

pg. 30) with this connection.

● To view a programme via the satellite receiver, select L-2 mode

by pressing AUX (NUMBER key “0”) and/or PR so that “L-2”
appears on the front display panel.

● To receive a scrambled broadcast, descramble the signal with

the satellite receiver.

● For details, refer to the instruction manual for the satellite

receiver and decoder.

IMPORTANT

When you set “L-2 SELECT” to “SAT” (

墌

pg. 39), it is possible to view a satellite broadcast with the TV set to its AV mode even if

the recorder is turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR
indicator on the front display panel.

● If you turn on the recorder when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the

satellite receiver, or set the TV to its TV mode, or press TV/VCR button on the remote control to set the recorder to the video
mode.

Outdoor unit

Satellite cable

Satellite receiver

Aerial

TV aerial cable

21-pin AV input connector
(SCART)

Back of TV

ANT. IN

RF OUT

Aerial
connector

Decoder

Mains outlet

Back of recorder

HRJ670EU2.fm Page 33 Thursday, January 13, 2000 2:25 PM