JVC hr-xvc29uj Manuale Utente

Masterpage:Right-No-Heading

Filename [XVC29U_07S-VHS.fm]

Page 33

14 June 2004 3:52 pm

Press DISPLAY until a counter reading appears on the 
front display panel.

Press C.RESET before starting recording or playback.

● The counter is reset to “0:00:00” and shows the exact elapsed 

time as the tape runs. You can check the exact time of a 
recording or playback.

Press DISPLAY until the time remaining on the tape 
appears.

● The front display panel shows the tape remaining time with “:” 

blinking.

● By pressing the DISPLAY button, you can change display to 

show the channel position*, clock time, counter reading or 
tape remaining time.

● When you press ON SCREEN, the on-screen display appears 

on the TV screen for 5 seconds, then the displays other than 
the counter disappears. To clear the counter display, press ON 
SCREEN.

● Depending on the type of tape being used, the tape remaining 

time reading may not appear right away, or is not correct. 
“– –:– –” may sometimes appear with “:” blinking, or the 
display may blink on occasion.

This unit’s built-in MTS decoder enables reception of 
Multichannel TV Sound broadcast. To record a SAP program 
received, set “2ND AUDIO RECORD” to “ON”. (

When the channel is changed on the unit;

● The “STEREO” indicator appears on the screen for about 

5 seconds if the program is a stereo broadcast.

● The “SAP” indicator appears on the screen for about 5 seconds 

if the program is a SAP broadcast.

● Both indicators appear when a stereo program is accompanied 

by SAP sound.

XVC29U_07S-VHS.fm  Page 33  Monday, June 14, 2004  3:53 PM