Toshiba 42L6200U Manuale Utente
116
Picture and Sound Controls
Adjusting the picture
* Backlight: Adjusts the brightness of the entire screen. When in video mode
and no signal is input, this selection is set to 0. (Settings are stored in
memory.)
and no signal is input, this selection is set to 0. (Settings are stored in
memory.)
Some settings cannot be adjusted in the following cases:
❖
AutoView is selected
❖
TheaterLock is set to On
To adjust the picture quality:
1
Press the MENU button. Select SETTINGS, PICTURE, the
setting you would like to adjust (Backlight, Contrast,
Brightness, Color, Tint, or Sharpness).
setting you would like to adjust (Backlight, Contrast,
Brightness, Color, Tint, or Sharpness).
2
Press the ( / arrow) buttons to adjust the setting. Press the
EXIT button.
EXIT button.
❖
Any picture settings that you adjust affect the current input only.
You can adjust the picture quality separately for each input.
You can adjust the picture quality separately for each input.
❖
Depending on a Sharpness value, the Edge Enhancer effect may
be reduced.
be reduced.
To reset to the factory defaults:
1
Select the picture mode you want to reset.
2
Press the MENU button. Select SETTINGS, PICTURE,
Reset, and then press the OK button.
Reset, and then press the OK button.
A confirmation screen appears.
3
Press the ( / arrow) buttons to select Yes, and then press the
OK button.
OK button.
Contrast
Lower
Higher
Brightness
Darker
Lighter
Color
Paler
Deeper
Tint
Reddish
Greenish
Sharpness
Softer
Sharper
Selection
Pressing ( )
Pressing ( )
NOTE
NOTE