Toshiba portege r500 Manuale Utente

232

5.375 x 8.375 ver 2.3

❖

      The “USB Sleep and Charge function” only works for 

compatible ports. This function is disabled in the default 
setting. To enable it, you must change Disabled to Enabled in 
the BIOS Setup.

❖

When “USB Sleep and Charge function” is set to Enabled in 
BIOS Setup, USB bus power (DC5V) will be supplied to 
compatible ports even when the power of the computer is 
turned OFF.

❖

USB bus power (DC5V) is similarly supplied to the external 
devices which are connected to the compatible ports. However, 
some external devices cannot be charged solely by supplying 
USB bus power (DC5V). As for the specifications of the 
external devices, please contact the device manufacturer or 
check the specifications of the external devices thoroughly 
before use.

❖

Using the USB Sleep and charge function to charge external 
devices will take longer than charging the devices with their 
own chargers.

❖

If external devices are connected to compatible ports when the 
AC adaptor is not connected to the computer, the battery of the 
computer will be depleted even when the power of the 
computer is turned OFF. As such, we recommend that you 
connect the AC adaptor to the computer when using the USB 
Sleep and charge function.

❖

      External devices connected to the USB bus power (DC5V) 

function that interfaces with the power ON/OFF of the 
computer may always be in an operational state.

NOTE