Toshiba satallite pro 6000 series c6602-1001m1 Manuale Utente

214

If Something Goes Wrong
Resolving a hardware conflict

Display Auto Off may have gone into effect. Press any key to 
activate the screen.

You may have activated the instant password feature by pressing 

Fn

and

F1 

simultaneously. If you have registered a password, press 

the 

Enter key

, type the password and press 

Enter

. If no password is 

registered, press 

Enter

. The screen reactivates and allows you to 

continue working.

If you are using the built-in screen, make sure the display priority 
is not set for an external monitor. To do this, hold the 

Fn

 key and 

press 

F5

 twice. A window with display choices pops up. Hold the 

Fn

 key and press 

F5 

twice again to advance through the display 

options.

If you are using an external monitor:

❖

Check that the monitor is turned on.

❖

Check that the monitor’s power cable is firmly plugged into a 
working power outlet.

❖

Check that the cable connecting the external monitor to the 
computer is firmly attached.

❖

Try adjusting the contrast and brightness controls on the 
external monitor.

❖

Press 

Fn

 and 

F5

 simultaneously to make sure the display 

priority is not set for the built-in screen.

You can change the display settings by clicking a blank area of the 
desktop with the secondary control button, then clicking 
Properties. This opens the Display Properties dialog box. The 
Appearance tab of this dialog box allows you to choose the colors 
for the screen. The Settings tab allows you to choose the screen 
resolution.