Toshiba sd-5970sc Manuale Utente

18

Connections

Connect the DVD video player to your TV.

For details of output sound, see 

.

Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet

before making any connections.

• If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable

adapter (not supplied) and then connect to your TV.

• Connect the DVD video player directly to your TV.  If you connect the DVD video player to a VCR, TV/VCR combination or

video selector, the playback picture may be distorted as DVD video discs are copy protected.

• Analog audio out will not have sound if DTS playback is selected.
• Do not set the ANALOG/HDMI selection other than standby mode.

* Only for analog video out jack (yellow) connection with

progressive scan off.

• Make the following setting.

On-screen display

Select:

Page

“PCM” or “Raw”

“Digital Out”

“Video Output”

  CVBS

* YUV

In standby mode, select ANALOG mode through the
ANALOG/HDMI switch on the front panel.