Toshiba strata ip5000 Manuale Utente
Headset and Handset Operation
AUTO or CARBON Setting
90
Strata CIX IP5000-series Telephone UG 05/08
AUTO or CARBON Setting
There exist two types of headsets: ECM and Carbon. The default setting on the
telephones is AUTO. When the headset is connected to the Headset Modular
Connector of the telephone, the AUTO setting enables the headset I/F current detector
to determine which headset type is connected (EMC or Carbon). If the current is
marginal using a carbon headset (only) and performance is not good, change the
setting to CARBON.
telephones is AUTO. When the headset is connected to the Headset Modular
Connector of the telephone, the AUTO setting enables the headset I/F current detector
to determine which headset type is connected (EMC or Carbon). If the current is
marginal using a carbon headset (only) and performance is not good, change the
setting to CARBON.
To change the setting from Auto to Carbon
Telephones: All except the Single Line Telephone
1. Press
3+6+9+Hold
(simultaneously).
2. Press
0
.
3. Press
FB6
to toggle Handset On/Off.
Press
FB11
to toggle Headset On/Off.
FB LED On: CARBON
FB LED Off: AUTO (default)
4. Press
Hold
to set the option.
5. Go off-hook, then on-hook to exit the program mode.
To change the headset transmit sensitivity level to Low or Normal
1. Press
3+6+9+Hold
(simultaneously).
2. Press
0
.
3. Press
Hold
.
4. Press
FB12
to toggle On/Off.
FB LED On: Low
FB LED Off: Normal (default)
5. Press
Hold
to set the option.
6. Go off-hook, then on-hook to exit program mode.