BMW X5 2002 Manuale Utente
157
n
Overview
Controls
Maintenance
Repairs
Data
Index
Changing a wheel
Position the jack on a firm support
surface.
Do not place wooden blocks or similar
objects under the jack. If this is done,
the jack might not be able to reach its
full support capacity because of the
limited height.
Do not lie under the vehicle or start the
engine when the vehicle is supported
by the jack. Failure to comply with this
creates a risk of fatal injury.
surface.
Do not place wooden blocks or similar
objects under the jack. If this is done,
the jack might not be able to reach its
full support capacity because of the
limited height.
Do not lie under the vehicle or start the
engine when the vehicle is supported
by the jack. Failure to comply with this
creates a risk of fatal injury.
<
What you will need
In order to avoid rattling noises later,
note the position of the tools when you
remove them and return them to their
original position when you are through
using them.
note the position of the tools when you
remove them and return them to their
original position when you are through
using them.
>
Two wedges (wheel chocks)
Open the liftgate and tailgate.
In the cargo area, fold up the floor
cover or pull-out cargo floor, refer to
page
Open the liftgate and tailgate.
In the cargo area, fold up the floor
cover or pull-out cargo floor, refer to
page
Take out the wedges (arrow) next to
the spare wheel
the spare wheel
530us117
>
Lug wrench
Is located next to the spare wheel
Is located next to the spare wheel
530us120
Online Edition for Part No. 01 41 0 156 416 - © 10/01 BMW AG