BMW x3 2005 Manuale Utente
Practical interi
or
acc
ess
orie
s
62
Practical interior accessories
Integrated universal remote
control*
The concept
The integrated universal remote control
replaces up to three different hand-held trans-
mitters for various items of radio-controlled
equipment such as door openers and house
alarm systems. The integrated universal remote
control recognizes and learns the transmitted
signal of each of the original hand-held trans-
mitters.
The signal of an original hand-held transmitter
can be programmed on one of the three mem-
ory buttons
replaces up to three different hand-held trans-
mitters for various items of radio-controlled
equipment such as door openers and house
alarm systems. The integrated universal remote
control recognizes and learns the transmitted
signal of each of the original hand-held trans-
mitters.
The signal of an original hand-held transmitter
can be programmed on one of the three mem-
ory buttons
1. Once this is done, each of the
devices can be actuated with the appropriately
programmed memory button
programmed memory button
1. The indicator
lamp
2 confirms transmission of the signal.
Should you sell your vehicle one day, be sure to
delete the stored programs beforehand for your
safety, refer to page
delete the stored programs beforehand for your
safety, refer to page
63
.
To prevent possible damage or injury,
before programming or using the inte-
before programming or using the inte-
grated universal remote control, always inspect
the immediate area to make certain that no peo-
ple, animals or objects are within the travel
range of the device. Also, comply with the
safety precautions of the original hand-held
transmitter.
the immediate area to make certain that no peo-
ple, animals or objects are within the travel
range of the device. Also, comply with the
safety precautions of the original hand-held
transmitter.
<
Checking compatibility
If you see this symbol on the packaging
or in the manual supplied with the orig-
inal hand-held transmitter, it is safe to
or in the manual supplied with the orig-
inal hand-held transmitter, it is safe to
assume that it is compatible with the integrated
universal remote control.
universal remote control.
If you have additional questions, please
consult your BMW Sports Activity Vehicle
consult your BMW Sports Activity Vehicle
Center or call 1-800-355-3515.
You can also visit these websites:
www.bmwusa.com or
www.homelink.com.
You can also visit these websites:
www.bmwusa.com or
www.homelink.com.
HomeLink is a registered trademark owned by
Johnson Controls, Inc.
Johnson Controls, Inc.
<
Programming
1 Memory buttons
2 Indicator lamp
2 Indicator lamp
Fixed-code hand-held transmitters
1.
Turn the ignition key to position 2.
2.
For initial use:
Press both outer buttons
Press both outer buttons
1 for approx.
20 seconds, maintaining pressure until the
indicator lamp
indicator lamp
2 starts to flash. The three
memory buttons
1 are cleared.
3.
Hold the original hand-held transmitter at a
distance of approx. 2 in/5 cm to 8 in/20 cm
from the memory buttons
distance of approx. 2 in/5 cm to 8 in/20 cm
from the memory buttons
1.
The required distance between the
hand-held transmitter and memory
hand-held transmitter and memory
buttons
1 depends on the relevant system
of the original hand-held transmitter used.
<
4.
Simultaneously press the transmit button
on the original hand-held transmitter and
the desired memory button
on the original hand-held transmitter and
the desired memory button
1 of the inte-
grated universal remote control. Initially, the
indicator lamp
indicator lamp
2 flashes slowly. Release
both buttons as soon as the indicator
lamp
lamp
2 flashes rapidly. If the indicator
lamp
2 does not flash rapidly after approx.
15 seconds, change the distance.
5.
To program other original hand-held trans-
mitters, repeat steps 3 and 4.
mitters, repeat steps 3 and 4.
Online Edition for Part-No. 01 41 0 158 448 - © 09/04 BMW AG