Yamaha AW4416 Manuale Utente

Chapter5—Recording on the AW4416

By using the four-band EQ and dynamics processor that are provided for each 
input channel, you can process the bass sound as you record it on a track.

❒ Using the four-band EQ

1. In the MIXING LAYER section, press the [1–16] key → [SEL] key 8.

[SEL] key 8 will light, and input channel 8 will be selected for control.

2. Press one of the EQ [HIGH]/[HI-MID]/[LO-MID]/[LOW] keys in the row 

at the right of the display to select the band that you wish to control.

When you press a key, the settings of that band will appear for a time in the upper 
right of the display.

The keys/controls at the right of the display can be used as dedicated controls for 
the channel that is currently selected by the [SEL] key. As with EQ, you can also use 
the [PAN] control located at the right of the display to adjust the panning of the cur-
rently selected channel.

3. Use the EQ [Q]/[F]/[G] controls to adjust the band that you selected in 

step 2. The function of each control is described below.

• [Q]  .................Adjust the steepness of each band. The range is 10.0–0.10, and 

higher settings will produce a steeper EQ curve.
The [Q] control of the HIGH band can also be used as a switch 
to change the EQ type between shelving and LPF. The [Q] con-
trol of the LOW band can also be used as a switch to change 
the EQ type between shelving and HPF.