Yamaha AW4416 Manuale Utente

Pagina di 280
Before you begin
— Operation Guide        
5
Installing a CD-RW drive
About the CD-RW drives
A CD-RW drive is an option that allows you to create music CD’s, to backup/
restore internal hard disk data, to play a music CD or to read a CD-ROM. An 
internal-type CD-RW drive can be installed by removing the CD-RW drive cover 
from the front panel. CD-RW drives with the following specifications can be 
used.
• Interface: SCSI-2
• Models known to work: consult your local Yamaha distributor or refer to the 
website at the following URL.
<http://www.aw4416.com/>
• By “models known to work,” we mean commercially available models that 
Yamaha has obtained, installed in the AW4416, and successfully tested by 
means of various operational tests. However, we cannot take into account 
slight differences in performance that may occur due to the manufacturing tol-
erances of each manufacturer.
• Please be aware that Yamaha Corporation will accept no responsibility for any 
damages, neither direct nor indirect, resulting from the use of any of the above 
CD-RW drives.
 * Note that the cover panel of the AW4416 cannot be attached to a CD-RW 
drive with a lid-type tray. The AW4416’s cover panel can be attached to a CD-
RW drive with a tray of the following dimensions.
❒ The SCSI ID of the CD-RW drive
• The SCSI ID of the AW4416 itself is fixed at “6.” For this reason, you must set 
the SCSI ID of the CD-RW drive to “6” before installing it.
Maximum 138 mm