Yamaha AW4416 Manuale Utente

Chapter14—Automix

11. If you wish to update the automix with the newly recorded content, 

move the cursor to the OK button and press the [ENTER] key.

The automix will be updated. If you move the cursor to the CANCEL button and 
press the [ENTER] key, the recorded content will be discarded, and the automix 
will return to its previous state.

• If in step 10 you move the cursor to the ABORT button and press the [ENTER] 

key, the recorded content will be discarded in the same way, and the automix 
will return to its previous state.

• Automix recording can also be stopped by using the on-screen STOP button 

instead of the [STOP] key. In this case, automix recording will stop, but the 
song will continue playing.

• Even after updating the automix content, you still move the cursor to the 

UNDO button in the right side of the screen, and press the [ENTER] key to 
return the automix to its state before recording (Undo). The front panel 
[UNDO] key cannot be used to undo automix.

Here’s how to play back the recorded automix.

1. Press the [AUTOMIX] key → [F1] key.

2. Make sure that the button in the AUTOMIX field is displayed as 

“ENABLE.”

If the button is displayed as “DISABLE,” move the cursor to the button, and press 
the [ENTER] key.

3. Make sure that the on-screen REC button and AUTO REC button are 

turned off.

If they are on, move the cursor to the corresponding button, and press the 
[ENTER] key.

4. Locate the song to a point slightly earlier than where you began record-

ing automix, and press the top panel [PLAY] key.

On

Off