Yamaha AW4416 Manuale Utente

Chapter15—MIDI

By transmitting program changes from an external device to the AW4416, you 
can recall AW4416 scene memories by remote control.

1. Connect the MIDI OUT connector of the external device to the MIDI IN 

connector of the AW4416.

2. Press the [MIDI] key, and then press the [F1] key.

The MIDI Setup page will appear in the display. In this page you can select the 
MIDI channel on which the AW4416 will transmit and receive, and specify 
whether program changes and control changes will be transmitted and received.

3. Move the cursor to the RX (receive) button in the PROGRAM CHANGE 

area, and press the [ENTER] key.

The button will change from “OFF” to “ON.” With this setting, program changes 
can be received.

4. Move the cursor to the Rx CH knob in the MIDI CHANNEL area, and 

rotate the [DATA/JOG] dial to select the MIDI receive channel of the 
AW4416.

If you turn on the OMNI button in the PROGRAM CHANGE area, program changes 
of all channels will be received.

MIDI OUT connector

MIDI IN connector