Yamaha AW4416 Manuale Utente

Chapter15—MIDI

MTC can be transmitted from the MTC OUT connector of the AW4416 to an 
external device such as a MIDI sequencer or computer, causing the MIDI 
sequencer (or computer-based sequencer program) to synchronize to the 
AW4416 song.

1. Use a MIDI cable to connect the AW4416’s MTC OUT connector to the 

MIDI IN connector of your MIDI sequencer.

2. Press the [MIDI] key, and then press the [F2] key.

The following screen will appear in the display.

3. Move the cursor to the MASTER button in the MTC SYNC area, and 

press the [ENTER] key.

With this setting, the AW4416 will function as the MTC master (the device that 
transmits MTC).

4. Move the cursor to the MTC button in the SYNC OUT area, and press 

the [ENTER] key.

With this setting, MTC will be transmitted from the MTC OUT connector when 
the AW4416 is running.

5. If you need to set the MTC frame rate, press the [SONG] key and then 

press the [F2] key.

MIDI IN connector

MTC OUT connector