Yamaha AW4416 Manuale Utente

You must use the following procedure to turn the power of the AW4416 on or off.

❒ Turning the power on

To turn on the power of a system that includes the AW4416, you must turn on the 
power switches in the following order.

1

Storage devices connected to the AW4416’s SCSI connector, and external 
sound sources connected to the input/output jacks

B

The AW4416 itself

C

The monitor system connected to the output jacks of the AW4416

If the SCSI device is turned on after the AW4416 is turned on, it will not function 
correctly.

After the opening screen appears in the display of the AW4416, a TRACK screen 
like the following will appear.

When the AW4416 is first turned on after a new internal hard disk has been 
installed, the display will ask “Format OK? [Y (Enter)/N (Any)].” If you now press 
the [ENTER] key, formatting of the hard disk will begin automatically. When for-
matting is completed, the screen shown above will appear.

Never turn off the power of the AW4416 while formatting is in progress. Doing 
so may damage the hard disk itself.