Yamaha AW4416 Manuale Utente
Chapter1—Welcome to the world of the AW4416
— Operation Guide
23
Input patch
The input patch section is where input signals are assigned to input channels 1–
24 and return channels 1/2. The following types of input signal can be selected.
24 and return channels 1/2. The following types of input signal can be selected.
❍ MIC/LINE INPUT
Input signals from analog INPUT jacks 1–8.
Input signals from analog INPUT jacks 1–8.
❍ OPTION IN
Input signals from an I/O card installed in rear panel OPTION I/O slots 1/2. Up to
8 channels of signal can be input simultaneously from a single I/O card.
Input signals from an I/O card installed in rear panel OPTION I/O slots 1/2. Up to
8 channels of signal can be input simultaneously from a single I/O card.
❍ SAMPLING PAD
Output signals of pads 1–8 in the sampling pad section.
Output signals of pads 1–8 in the sampling pad section.
❍ EFFECT 1/2
Return signals from internal effects 1/2.
Return signals from internal effects 1/2.
❍ DIGITAL STEREO IN
Input signals from the DIGITAL STEREO IN jack.
Input signals from the DIGITAL STEREO IN jack.
❍ METRONOME
The playback of the internal metronome.
The playback of the internal metronome.
The following input signals can be assigned to each channel.
Input channel 1–24
(mono)
Return channel
1 (stereo)
Return channel
2 (stereo)
MIC/LINE INPUT
O
O
O
OPTION IN
O
O
O
SAMPLING PAD
O
EFFECT 1
O
EFFECT 2
O
DIGITAL STEREO IN
O
O
O
METRONOME
O