Yamaha AW4416 Manuale Utente

Chapter5—Recording on the AW4416

1. Press the Locate section [RTZ] key.

The level meter/counter and the display counter will rewind to zero 
(00:00:00.000).

With the default settings of the song, hours (hours/minutes/seconds/milliseconds) 
are selected as the counter unit of the level meter/counter and display counter. 
However you may switch this to time code display (hours/minutes/seconds/frames/
sub-frames) or measure display (measure/beat/tick) if desired.

2. To begin recording, hold down the Transport section [REC] (●) key and 

press the [PLAY] (®) key.

The [REC] key and [PLAY] key will light, and the red REC READY indicators of the 
[REC TRACK SELECT] keys 1/2 and the level meter/counter will change from 
blinking to lit.

When you attempt to record the signal being input from the DIGITAL STEREO IN 
jack, the display may sometimes indicate “DIGITAL-ST-IN-PROHIBIT,” and you 
will be unable to perform step 2. In this case, go to UTILITY screen Prefer.2 page 
([UTILITY] key → [F3] key), and set CD/DAT DIGITAL REC to ENABLE. (For 
details refer to Reference Guide “UTILITY” screen.)