Yamaha 007POTO-G0 Manuale Utente
93
Assigning channels to the custom fader layer
LS9-16/32 Owner’s Manual
8
Custom f
ader la
y
er
1
Channel module select field
Select the channels that will be assigned to the top
panel channel modules 1–16 {1–32}.
panel channel modules 1–16 {1–32}.
B
ST IN channel select field
Select the channels that will be assigned to the top
panel ST IN channels 1–2 {1–4}.
panel ST IN channels 1–2 {1–4}.
3
Move the cursor to the channel module
select field or the ST IN channel select field,
use the dial or the [DEC]/[INC] keys to
select the channel that you want to assign
to that field, and press the [ENTER] key.
select field or the ST IN channel select field,
use the dial or the [DEC]/[INC] keys to
select the channel that you want to assign
to that field, and press the [ENTER] key.
The field will show the name of the selected channel.
The following channels can be selected for each field.
●
Channels that can be selected in the chan-
nel module select field
nel module select field
• INPUT channels 1–32 {1–64}
• ST IN channels 1–4
• STEREO channel
• MONO channels
• MIX channels 1–16
• MATRIX channels 1–8
• MONITOR LEVEL
If you select a ST IN channel 1–4 or the STEREO
channel in the channel module select field, the L/R
channels will be assigned together. In this case, the
channel module will operate as follows.
channel in the channel module select field, the L/R
channels will be assigned together. In this case, the
channel module will operate as follows.
• The fader and [ON] key will operate the L and R
channels together.
• The L and R channels will be selected alter-
nately each time you press the [SEL] key.
• The meter LEDs will indicate the signal level of
the L or R channel, whichever level is greater.
If you select one of a pair of MIX/MATRIX channels
set to stereo in the channel module select field, the
channel module will operate as follows.
set to stereo in the channel module select field, the
channel module will operate as follows.
• The fader and [ON] key will operate the two
MIX/MATRIX channels together.
• Pressing the [SEL] key will select only the MIX/
MATRIX channel that you assigned.
• The meter LEDs will indicate the signal level of
the L or R channel, whichever level is greater.
●
Channels that can be selected in the ST IN
channel select field
channel select field
• ST IN channels 1–4
4
Assign channels to other fields in the same
way.
way.
5
To recall the custom fader layer you’ve cre-
ated, press the LAYER [CUSTOM FADER]
key in the LAYER section.
ated, press the LAYER [CUSTOM FADER]
key in the LAYER section.
The channels you selected in step 3 will be assigned to
the channel module section and ST IN channel section
of the panel.
the channel module section and ST IN channel section
of the panel.
• As an alternative to using the dial or the [DEC]/[INC] keys,
you can move the cursor to the field you want to edit and
press a [SEL] key to select a channel.
press a [SEL] key to select a channel.
HINT
• Custom fader layer settings are remembered for each user.
When a user logs-in, their previous settings will be repro-
duced.
duced.
HINT